SR-Pan-Tilt-Head has been added to your cart.
PROAIM - Head

SR-Pan-Tilt-Head


991.32 EUR 951.66 EUR
  • MFR-CODE: PT-SR
  • BLK-CODE: 226-0025
  • Pan/Tilt Head for Camcranes
  • 7.5KG Payload
  • 360degrees X-axis & Y-axis
  • Max speed: 51degrees/sec
  • Min speed: 6degree/sec
  • Speed & Dead Spot Adjust
  • 12V external power
  • 1-year Warranty
991.32 EUR 951.66 EUR

“PROAIM Sr. Pan Tilt Head with 12V Joystick Control”enables 360-degree panning and tilting ability with multi-dimensional moves while keeping your camera safe and secure. Ergonomically designed magnificent piece of engineering gives you intelligent solution for complicated shots.

Creative flexibility allows free movement of camera that give your photography a new texture and professional look. Pristine action shots, profound cinematography with extraordinary output, what else one can aspire for!!
  • Flawless 360 pan-tilt mechanism
  • Precision engineered/quality construction
  • Weighs upto 16.5 lbs
  • 12V DC power adapter for AC service/brick-car battery-12V DC cable
  • Remote control joystick of industrial grade components
  • An industry standard, third generation, professional product
 
Speed is variable and is easily controlled and adjusted by "Speed" and "Dead Spot" potentiometers on the control unit.

->  The Dead spot control determines the center band of the 
     joystick where no motion will occur and insure no 
     crossover to the other axis when not wanted.
->  Outdoor use requires rain protection cover.
->  Out of the box, the Pan Tilt System with assembled wiring 
     for Top and Bottom Motors.
->  Install the Power out to head (3 pin connector) and 12 volt 
     DC power (4 pin XLR) in rear of joystick box and you are 
     good to go.

SPECIFICATIONS
->  Supports maximum camera weight of 16.5lbs
->  Variable-controlled speed from 6 degrees/sec (low speed) 
     to 51 degrees/sec. (high speed)
->  Minimum height of head 17"
->  Maximum height of head 26"
->  Precision machined parts and industrial grade electronic 
     components
->  AC Adapter input - AC 100 - 240V output - DC 12V -2A
->  Driven by two high-torque coreless DC motors that pan 
     and tilt the head through 360 degrees
->  It takes 2 minutes to pan through 360 degrees at its 
     slowest speed without stopping and just 7 seconds at its 
     highest speed
->  Consistent operation at its slowest speed without 
     stopping
->  Camera platform height can be adjusted at any point 

STATUS

Status
New
Head Type
Motorized Pan-Tilt Head

MORE SPECIFICATIONS

Power
DC input 12V
Warranty
1-Year
Country of Origin
India
Extras
Two high torque, coreless DC motors that rotates (pans) and tilts the head 360 degrees.
2- Brass Small Gears(Dia- 13.5mm), 2- Big Aluminum Gears (Dia- 88mm).
Head height: 47cm up to 66cm .
Power Consumption
24Watt (12V/2A)

PHYSICAL

Availability
Usually in 12working days
Total Weight (KG)
7.2
Total Dimensions (WxHxD) (mm)
500x350x190

HEAD FEATURES

Head Mount
4x Screws
Camera Mount
1/4" Screw
Head Payload
7.5
Pan Range (Head)
360 degrees - 6 degrees/sec up to 51 degrees/sec
Tilt Range
360 degrees - 6 degrees/sec up to 51 degrees/sec
  • - Proaim Sr. Pan & Tilt Camera Motorized Head
  • - Joystick Control
  • - 15 meter/49foot long Control Cable (Revised on 16-Mar-2018)
  • - 3 meter long 4pin XLR cable (for using 12VDC Battery Packs)
  • - 12volt AC Adapter
  • - 1/4"-Camera Mounting Screw
  • - Worldwide Universal Adapterbr
  • - Storage Case with Custom Fit Packing
Pdf not available.
Proaim SR Head Review

product
HOT
-20%

357 Quick Release plate

MFR#357-1  BLK#023-0060
91.64 EUR 87.97 EUR
  • Carbon Video Tripod Kit
  • For Handheld/Photo Cameras
  • 4KG Payload
  • 35-179.5cm
product
HOT
-20%

Quick Release Plate 577

MFR#577  BLK#023-0068
99.12 EUR 95.15 EUR
  • Quick Release Plate
  • RC4 Type
  • 1/4" & 3/8" screws
  • Equipped with 2 built-in spirit levels