Datavideo - Head

PTR 10T MARK II Robotic

2,852.45 EUR 2,738.35 EUR

MFR-CODE: PTR-10TMKII
BLK-CODE: 172-0234

Pan/Tilt Head for Cameras
4KG Payload
HDBaseT convertion
Range: Pan: 340°, Tilt: ±45°
Pan speed: 0.2~15° /Sec
Tilt speed: 0.1~10° /Sec
50 Memories Pan/Tilt
HDMI/SDI/RJ45 connections

~~2,852.45 EUR~~ 2,738.35 EUR

PTR-10T MARK II makes the change from regular camcorder cameras to remote controlled PTZ very cost effective. Multi-camera remote operations can be handled by a single person.

Wide Range of Compatible Cameras Supported

The PTR-10T MARK II implements LanC control that is compatible with a wide range of professional video camcorders, allowing you to select the best camcorders for your needs.

Light Weight, Strong, and Sturdy design

With a weight of 3.4 kg, PTR-10T MARK II is built from aluminum alloy, making it a very sturdy base for your camera. It can support cameras up to 4 kilograms.

Diversified Controller Options

Compatible with Serial, Ethernet, and Lanc. Datavideo RMC-180 series, RMC-300A, and HS-1600T series will fit your need.

Built-in Tally light

With the big tally light in the front to show the status of your camera.

D-tap connector for DC output

The D-tap connector is widely used in the broadcast industry as a standard for powering accessories from battery or mains power.

This will make it easier for you to find a ready-made power cable for your specific camera. Included is a D-tap to DC 5.5mm with lock for Datavideo cameras.

Selectable DC

Voltage output for different cameras (7.4 / 8.4 / 10 / 12V )

Multiple Signal Interface

PTR-10T MARK II supports a lot of signal interface for passing through the remote head. Amongst these interfaces are SDI, HDMI, RS-232, RS-422, HDBaseT, Tally, and LANC.

Specifications not available.