TVLogic - Monitor
F-5A
6,172.10 EUR
5,925.21 EUR
- MFR-CODE: TVL-F-5A
- BLK-CODE: 395-0055
- On-Camera Monitor?
- LCD 5.5" 1920x1080Pixel
- 3G/HD/SD-SDI IN/OUT
- HDMI IN/OUT
- USB for Firmware updates
- Contrast: 1000:1 - Brightness: 500nits
- Focus Assist / WFM / Image Flip
- High Quality
The F-5A is a compact and light-weight field production monitor with Full HD resolution of 1920 x 1080, nice viewing angle and max luminance of 500nit. Equipped with a new image processing engine, F-5A reproduces even better sharpness and peaking boost capability for focus pullers. It also supports various video formats via 3G-SDI and HDMI 1.3 interface. And also support professional features such as Waveform/Vectorscope, Focus Assist, 3D LUT import, Camera Logs and HDR emulation.
Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.
Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.
Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.
Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.
Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.
Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.
Anahlyzes the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted levels of signals and for a better exposure setting.
Displays the Timecode information on the screen.
Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.
Magnifies the input signal from 0% to 90%.
Applies the LUTs to the outbound Log signal. A LUT for every major camera manufacturer has been included(LOG-C, C-LOG, S-LOG 1,2,3 and RED Gamma 3,4).
The HDR emulation function allows users to check how an HDR image will look at the shooting location. Adjustable modes are PQ, HLG and SLog3.
Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.
Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.
Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.
Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.
Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.
Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.
Anahlyzes the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted levels of signals and for a better exposure setting.
Displays the Timecode information on the screen.
Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.
Magnifies the input signal from 0% to 90%.
Applies the LUTs to the outbound Log signal. A LUT for every major camera manufacturer has been included(LOG-C, C-LOG, S-LOG 1,2,3 and RED Gamma 3,4).
The HDR emulation function allows users to check how an HDR image will look at the shooting location. Adjustable modes are PQ, HLG and SLog3.
MORE SPECIFICATIONS
- Extras
-
Battery Plates not included
Firmware Update through USB.
HDR Support.
- Power Consumption
-
7.5Watt(6V/1.25A, 34V/0.27A)
CONNECTIONS
- No. of Audio outputs
-
1/1/1
- No. of Video outputs
-
1/1
- No. of Audio inputs
-
1/1
- No. of Video inputs
-
1/1
PANEL
- Colors
-
16.7 Million
- Frames Supported
-
24P/25P/30P/50P/50i/60P/60i @1920x1080Pixel
50P/60P @1280x720Pixel
25P/50P/50i @720x576Pixel
30P/60P/60i @720x480pixel
PHYSICAL
- Total Weight (KG)
-
0.42
- Total Dimensions (WxHxD) (mm)
-
162x92x35
- TVLogic F-5A 5.5" IPS On-Camera Monitor with L-Series Type Plate
- D-Tap Cable
- L-Shaped BNC Adapter
- Screen Protector
- Camera Support
Pdf not available.
TVLogic F-5A Review
Adapter
HOT
-20%
Hot-Shoe-Ball-Mount
- Mount Adapter
- Hot Shoe for Camera
- 1/4" Screw for Monitor
- Ball Head
HOT
-20%
Pan-Tilt-Mount
- Pan-Tilt Mount Adapter
- Hot Shoe for Camera
- Special Mount for Monitor
- Ball Head
HOT
-20%
StrongArm 7 Articulating
- Mount Adapter - Magic Arm
- Hot Shoe for Camera
- 1/4" Screw for Monitor
- Magic Arm
Cable
HOT
-20%
HOT
-20%
12-inch Thin Micro HDMI
- Thin HDMI Cable
- Micro-HDMI to Full HDMI
- Male to Male
- 0.3m
HOT
-20%
HOT
-20%
HOT
-20%
HOT
-20%
HOT
-20%
HOT
-20%
36-inch Thin Micro to HDMI
- HDMI Cable
- Micro-HDMI to Full-HDMI
- Male to Male
- 915mmm length
HOT
-20%
HOT
-20%
HOT
-20%
AtomFlex HDMI to HDMI 30cm
- Cable HDMI
- Full HDMI to Full HDMI
- Male to Male
- 30cm up to 60cm
HOT
-20%
AtomFlex HDMI-HDMI 40CM
- Cable HDMI 4K 60P
- Full-HDMI to Full HDMI
- Male to Male
- 40cm up to 80cm
HOT
-20%
AtomFlex Micro to HDMI 30cm
- Cable HDMI 4K 60P
- Micro HDMI to Full HDMI
- Male to Male
- 30cm up to 60cm
HOT
-20%
AtomFlex Micro To HDMI 40cm
- Cable HDMI
- Micro HDMI to Full HDMI
- Male to Male
- 40cm up to 80cm
HOT
-20%
AtomFlex Mini Full HDMI 30cm
- Cable HDMI 4K 60P
- Mini-HDMI to Full HDMI
- Male to Male
- 30cm up to 60cm
HOT
-20%
AtomFlex Mini Full HDMI 40cm
- Cable HDMI 4K 60P
- Mini-HDMI to Full HDMI
- Male to Male
- 40cm up to 80cm
HOT
-20%
HOT
-20%
HOT
-20%
D-TAP to Mini XLR Female 70cm
- Power Cable
- For TVlogic F-5A/F-10A
- DTAP to 4-pin Mini XLR
- Male to Female
HOT
-20%
DTAP-Coil-cable
- Power Cable
- For TVlogic F-5A/VFM-056
- DTAP to Mini XLR 4pin
- 17-inch length
HOT
-20%
HDMI Male to Male 55cm
- Slim HDMI Cable
- Full HDMI to Full HDMI
- Male to Male
- 55cm Length
HOT
-20%
HDMI to HDMI 0.5m
- HDMI Cable 0.5m
- Full HDMI to Full HDMI
- 4K, 3D, Deep Color
- 6.0mm Cable Diameter
HOT
-20%
HDMI to HDMI 0.5m Black
- HDMI Cable 0.5m
- Full HDMI to Full HDMI
- 4K, 3D, Deep Color
- 4.5mm Cable Diameter
HOT
-20%
HDMI to HDMI 2m Flat
- HDMI Cable 2m Flat
- Full HDMI to Full HDMI
- 4K, 3D, Deep Color
- Up to 3840x2160pix
HOT
-20%
HDMI to HDMI 30cm
- Cable HDMI
- Full HDMI to Full HDMI
- Male to Male
- 30cm up to 45cm
HOT
-20%
HDMI to HDMI 3m
- HDMI Cable 3m
- Full HDMI to Full HDMI
- 4K, 3D, Deep Color
- Up to 3840x2160pix
HOT
-20%
HDMI to HDMI 5m
- HDMI Cable 5m
- Full HDMI to Full HDMI
- 4K, 3D, Deep Color
- Up to 3840x2160pix
HOT
-20%
HDMI to HDMI Full 70cm 4K
- 4K/HD HDMI Cable
- Full HDMI to Full HDMI
- Male to Male
- 70cm Length
HOT
-20%
HOT
-20%
HDMI-HDMI-Thin-1.5M
- HDMI Cable
- Full HDMI to Full HDMI
- Type A to Type A
- Length: 1.5M
HOT
-20%
HOT
-20%
Micro HDMI to Full HDMI 1.5m
- HDMI Cable 1.5m
- Full HDMI to Micro HDMI
- 4K, 3D, Deep Color
- Up to 4K@30Hz
HOT
-20%
Micro to Full HDMI 30cm
- Cable HDMI
- Micro HDMI to Full HDMI
- Male to Male
- 30cm up to 45cm
HOT
-20%
Micro To Full HDMI 50cm
- Cable HDMI
- Micro HDMI to Full HDMI
- Male to Male
- 50cm up to 65cm
HOT
-20%
Micro to HDMI w Angle 30cm
- Cable HDMI
- Micro HDMI to Full HDMI
- Male to Male Right Angle
- 30cm up to 45cm
HOT
-20%
Micro-HDMI-Angle-Standard
- HDMI Cable
- Micro-HDMI to Full-HDMI
- Lightweight - Micro Angle
- Length: 70cm
HOT
-20%
Micro-HDMI-Standard-1.5M
- HDMI Cable
- Micro-HDMI to Full-HDMI
- Lightweight - Micro Angle
- Length: 1.5M
HOT
-20%
Micro-HDMI-Standard-3M
- HDMI Cable
- Micro-HDMI to Full-HDMI
- Lightweight - Micro Angle
- Length: 3M
HOT
-20%
Mini HDMI to Full HDMI 1.5m
- HDMI Cable 1.5m
- Mini HDMI to Full HDMI
- 4K, 3D, Deep Color
- Up to 4K@30Hz
HOT
-20%
Mini HDMI to Full HDMI 2m
- HDMI Cable 2m
- Mini HDMI to Full HDMI
- 4K, 3D, Deep Color
- Up to 3840x2160pix
HOT
-20%
Mini HDMI to Full HDMI 55cm
- Slim HDMI Cable
- Mini-HDMI to Full HDMI
- Male to Male
- 55cm Length
HOT
-20%
Mini-HDMI-HDMI-70cm
- HDMI Cable
- Mini HDMI to Full HDMI
- Type C to Type A
- Length: 70cm
HOT
-20%
HOT
-20%
Mini-HDMI-Standard-1.5M
- HDMI Cable
- Mini HDMI to Full HDMI
- Type A to Type A
- Length: 1.5M
HOT
-20%
HOT
-20%
Slim Micro-HDMI to HDMI 55cm
- Slim HDMI Cable
- Micro-HDMI to Full HDMI
- Male to Male
- 55cm Length
Cover
HOT
-20%
Acrylic Clear Protector 055A
- Acrylic Protector
- For TVlogic F-5A Monitor
- For VFM-055A Monitor
- Clear
HOT
-20%
Sunhood VFM-055A F-5A
- Sunhood
- For TVlogic VFM-055A
- For TVlogic F-5A
- Secures with Straps