Rode - Microphone
NTG2 Shotgun
249.63 EUR
239.64 EUR
- MFR-CODE: NTG-2
- BLK-CODE: 034-0015
- Shotgun Microphone
- Condenser Super Cardioid Mic
- 20Hz - 20kHz Frequency Response
- Sensitivity: -36dB - AA Battery
- Nominal impedance: 250 Ohm
- Lightweight
- Durable Material
- High Quality
- Two step High Pass Filter (Flat/80Hz)
- P48 phantom power or AA battery option
- Low handling noise
- Low weight - 161g (5.17 oz.)
- Includes mic clip, wind shield and zip case
- Ideal for professional applications within the film, video, television and production industries
- 10 year extended warranty when you register online at www.rodemic.com/warranty
The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
STATUS
- Status
- New
- Microphone Type
- Shotgun
MORE SPECIFICATIONS
- Warranty
- 10-Years
- Country of Origin
- Germany
- Extras
-
Two step High Pass Filter (Flat/80Hz)
PHYSICAL
- Availability
- Usually in 12working days
- Total Weight (KG)
-
0.161
- Total Dimensions (WxHxD) (mm)
-
280x22x22
CONNECTIONS
- Audio Output
- 3-Pin XLR Analog
- No. of Audio outputs
-
1
MICROPHONE FEATURES
- Mic Frequency Response
- 20Hz - 20kHz
- Mic Max SPL (dB)
- 131.0
- Sensitivity (dB)
- -36.0
- Polar Pattern
- Super-Cardioid
- Power Options
- Phantom Power 48V
- Transducer Principle
- Condenser
- ON/OFF Switch
- No
- Capsule
-
1.27cm
- Length (cm)
-
28.0
- Diameter (cm)
-
2.2
- Signal-to-noise-ratio
-
18dB-A
- Normal impedance (Ω)
-
250.0
- NT-G2 Microphone
- RM5 Clip
- WS-VM Windshield
- ZP2 Padded Zip Pouch
Pdf not available.
Video not available.
Adapter
HOT
-20%
APM-35S Holder
- Microphone holder
- For small Microphones
- Max 22-27mm diameter
- ABS plastic
HOT
-20%
HOT
-20%
HOT
-20%
RM5 Durable Mic Clip
- Microphone Clip
- 3/8" & 5/8" Thread
- Plastic
- For NT5,NT6,NTG1,NTG2,NTG3 Mic.
HOT
-20%
Shotgun Holder with Shoe
- Microphone holder
- For Shotgun microphones
- Hot Shoe
- 19-25mm diameter mics
HOT
-20%
SM3-R Shock Mount
- Shock mount for Microphones
- Camera Shoe Adapter
- 3/8" Thread
- Plastic
HOT
-20%
SM4-R Shock Mount
- Suspension Shockmount
- For Shotgun & Pencil Mic.
- 3/8" & 5/8" Thread
- Angle Adjustable Mount
Case
HOT
-20%
Stingray Bag
- Case for Microphones
- For two shotgun microphones
- Max Mic dimensions: 327x27mm
- Dustproof/Scratchrproof
Cover
HOT
-20%
DeadCat
- Fur Windshield
- For Shotgun Microphones
- For Rode VideoMic, NTG-1, NTG-2
- Can be used with Foam Windhield
HOT
-20%
HOT
-20%
Shotgun WSVM
- Foam Windshield
- For Shotgun Microphones
- For Rode NTG-1, NTG-2
- Fits directly to the Microphone
HOT
-20%
WS6 Shotgun Windshield
- Fur Windshield
- For Shotgun Microphones
- For Rode NTG-1, NTG-2, NTG-4
- Fits directly to the Microphone
Monopod
HOT
-20%
HOT
-20%
Micro Boompole up to 2m
- Boom Pole-2m
- For Shotgun Microphones
- For Boom Blimps
- From 84cm up to 2m
HOT
-20%
Pole 3M
- Boom Pole-3m
- For Shotgun Microphones
- For Boom Blimps
- From 84cm up to 3m