- Large 1” HF1 gold sputtered capsule
- Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic
- Continuously variable PAD and High-Pass Filter
- Ultra low noise, transformerless surface mount circuitry
- Wide dynamic range
- High strength welded and heat treated steel mesh head
- Internal capsule shock mounting
- Includes SM2 shock mount and RC1 case
- 10 year extended warranty when you register your microphone
The RØDE NT2000 microphone is a studio-quality large diaphragm condenser with seamlessly variable polar patterns. Its polar patterns selection, filter and pad are conveniently located on the front of the microphone body for ease of use.
Audiophile quality surface-mount electronics combined with a gold-sputtered dual 1" capsule provide extremely low self-noise (7dBA) and a maximum SPL of 147 dB (up to 157 dB with pad fully engaged) giving an incredible amount of versatility and ensuring exceptional results.
The RØDE NT2000 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
STATUS
- Status
- New
- Microphone Type
- Studio Microphone
MORE SPECIFICATIONS
- Warranty
- 10-Years
- Country of Origin
- Australia
- Mount
- Ring Mount
- Extras
-
Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic.
Continuously variable PAD and High-Pass Filter.
Large 1” HF1 gold sputtered capsule.
PHYSICAL
- Availability
- Usually in 12working days
- Total Weight (KG)
-
0.831
- Total Dimensions (WxHxD) (mm)
-
208x55x55
CONNECTIONS
- Audio Output
- 3-Pin XLR Analog
- No. of Audio outputs
-
1
MICROPHONE FEATURES
- Mic Frequency Response
- 20Hz - 20kHz
- Mic Max SPL (dB)
- 147.0
- Sensitivity (dB)
- -36.0
- Polar Pattern
- Figure-8
- Power Options
- Phantom Power 48V
- Transducer Principle
- Condenser
- ON/OFF Switch
- Yes
- Length (cm)
-
20.8
- Capsule
-
2.54cm (1.0")
- Signal-to-noise-ratio
-
7dB-A
- Normal impedance (Ω)
-
200.0
- Diameter (cm)
-
5.5
- NT2000 Mic
- SM2 Microphone Shock Mount
- RC1 Rugged Microphone Case
Pdf not available.
Rode NT2000 Review
Adapter
HOT
-20%
RM2 Stand Ring Mount
- Ring mount for Microphones
- 3/8" & 5/8" Thread
- Plastic
- For Studio Microphones
HOT
-20%
SM2 Shock Mount
- Shock mount for Microphones
- 3/8" & 5/8" Thread
- Plastic
- Anti-Shock Rubbers
HOT
-20%
SM6 Shock Mount
- Shock mount for Microphones
- 3/8" & 5/8" Thread
- POP Filter
- Plastic
HOT
-20%
SMR Premium Shock Mount
- Shock mount for Microphones
- 3/8" & 5/8" Thread
- POP Filter
- Plastic
Cover
HOT
-20%
WS-2 Foam
- Foam Windshield
- For Condenser Microphones
- Fits directly to the Microphone
- Protects from Wind noise
Filter
HOT
-20%
Reflexion X
- Audio Filter
- For Studio Recordings
- Four-layer acoustic filter
- Wool fabric layer & Foam